The use of the LaserLine Wing Plow Guidance Laser helps to avoid costly property and plow damage which results in reduced downtime. It is clearly the safer way to plow.

The System

The LaserLine GL3000PMC wing plow guidance laser uses an “ultra-bright” green laser spot to establish the wing plow trailing edge location before you get there.

The laser spot impacts on the road/snow surface ahead of the truck, and shows the driver where the wing plow trailing edge will be. The laser reference spot is on the road and in the driver’s normal field of view.

GL3000PMC Guidance Laser mounted under headache rack

The LaserLine wing plow guidance laser (GL3000PMC) is electronically designed for cold weather operation. This laser is coupled to a special heat source for the exit window, to reduce or eliminate ice build-up on the front of the laser output lens.

The LaserLine wing plow guidance laser (GL3000PMC) also has a unique pneumatic snow removal system incorporated within the laser housing that automatically fires a blast of air at the front of the laser lens every five seconds. This removes snow build-up from the laser output lens.

The LaserLine wing plow guidance laser (GL3000PMC) leverages a class IIIA ultra bright green laser with 5mW of power. Green is most visible to the eye in all working conditions. The GL3000PMC laser is CFR21-1040 compliant and meets all federal and OSHA standards for operation.

GL3000PMC "ultra bright" green laser

The laser housing is weatherproof, hermetically sealed, and dry nitrogen charged for operation in virtually any weather condition.

The LaserLine wing plow guidance laser system works directly off the 12-volt side of truck, and will operate from 11 to 15 volts DC with positive or negative ground.

• Reduces plow and property damage
• Reduces downtime for plow repair
• Less strain on the operator *
• Safer

The Product

• Main Housing
  Weatherproof, containing optic plate mounting platform, micro processor electronics, laser, laser mounting assembly, laser driver board, automatic cooling and heating system; front window is automatically heated to reduce or eliminate icing.
• Pneumatic Air Blast Module
  Removes snow build up from laser exit window with automatic air blast every five seconds.
• Control Panel In Cab
  Allows the operator to turn the laser on and off as well as override the automatic air blast if more air is desired for snow removal.
• 20 Feet of Interconnect Cable
  With waterproof mil spec-line connector mounted between the laser main housing and the control panel mounted in the cab.
• 5 Feet of 12V DC Cable
  Running from control box for connection to vehicle’s 12V DC power.
• 20 Feet of ¼-Inch Pneumatic Hose Line
  Complete with connectors for tying into vehicle’s secondary air source.

Specifications:

• Laser: 532 NM Class IIIA Green Laser
• Power: 11-15V DC Positive or Negative Ground
• Power Draw: 4.0 Amps (Maximum Operating), 0.03 Amps (sleep Mode)
• Operating Temperature: -40° F to +50° F (-40° C to +10° C)
• Pneumatic: 120 PSI / 12V DC Operation
• Laser Dimensions:
  • Height:  4½ Inches
  • Length: 9 Inches
  • Width (At Widest Point): 6 Inches
• Cable Length from Laser to Control Box: 20 Feet
• 12V Power Cable Length from Control Box: 5 Feet
• Pneumatic Hose Length (Laser to Air Source): 20 feet
• Shipping Weight: 25 lbs

The 1140 Series senses the voltage that is hooked up to it and automatically runs the laser on that specific voltage.

The 1140 Series is the only class 2 UL listed power converter rated for outdoor use in the entire laser industry.

The 1140 Series Power Converter is compact and tough, and can provide years of trouble-free operation.

Download Brochure (PDF*)

Features of the LaserLine 1140 Series Power Converter:

• Overvoltage protection
• Short circuit protection
• Runs lasers from 90 to 260 VA C
• Compact: 2 1/4 x 3 x 6 1/4”
• UL listed for outdoor use

Modules

• 1140-1
  Three-pin jack connector to laser
• 1140-2
  Battery clip connector to laser
• 1140-3
  Three-pin jack, PLUS battery clip connection

Download Brochure (PDF*)

T2000SD

• The LaserLine T2000SD is a heavy-duty “building block” design, built for the rigors of even the toughest construction environments. The T2000SD may be added to from its basic configuration, depending upon the needs of your particular job or application.
• The LaserLine T2000SD laser beam is fixed focused to infinity. This provides the smallest possible spot over the longest possible distance.
• High power - 5 Milliwatts of power assures you of more range to target area, even in adverse weather or when shooting through a series of forward targets.
• Ultra-fine horizontal and vertical fine adjust with 64 pitch thread for fast and precise alignment on your set-ups.
• Very stable; once set in place, the LaserLine T2000SD stays on your forward target!
• The LaserLine T2000SD is designed to accept a tribrach. This is especially beneficial when “leap frogging” to forward points in tunnel work.
• In tunnel work as a tunneling laser or mining laser, the LaserLine T2000SD has three times the range (laser spot brilliance and quality), thus reducing the need to move the laser forward.
• In marine work, it translates to much greater visibility in adverse weather conditions.

T2000SDG Ultra Bright Green Laser

• All the same great features of the LaserLine T2000SD, plus this model is 3-5 times more visible to the eye. Contact us for details.

Accessories

Spotting Scope 6-24x 2000-0525. Variable power from 6-24x objective diameter is 40mm. Field of view varies at 100 yards from 17 feet to 4 feet depending on power setting. Ring mounts are satin chrome steel finish for rust free operation in wet conditions. Use with the LaserLine T2000 series long range alignment laser.

Fan Lens 2000-0035. Changes the laser beam from a spot to a vertical plane of laser light. The fan lens expands the laser beam in the vertical direction at 1320 feet per mile, while maintaining the horizontal width expansion at 4 inches per mile. Use with LaserLine T2000 series long range alignment laser.

Universal Tunnel Mount 2000-10. An ultra solid, yet versatile multi-positioning platform for all models of lasers. The mount gives you the ability to both horizontally and vertically position the laser to the pre-determined point that you require. In addition to offering tremendous versatility for your laser positioning, it is very rugged and stable.

Power Converter 1140. UL Listed converts 110 or 220 VAC to 12 VDC. Internally protected from short circuits and overloads. Resets automatically – no fuses or circuit breakers. Use with all LaserLine models.

Optical Plummet Tribrach 2000-0630. Features universal 5/8 x 11 base plate thread. The range of the optical plummet is 1.5 feet to 50 feet. (0.5m to 15m). The circular level vial has a sensitivity of 10 minutes (2mm). Use with 2000-0620 adapter for the LaserLine T2000 series long range alignment laser.

Download Brochure (PDF*)

Features of the LaserLine Direct Reading Rod:

• Aluminum front and rear rods
  Made of high strength clear anodized aluminum for lightweight, rugged, dependable operation. These reading rods will not rust, split, splinter, swell or warp in any environment.
• Tape has heavy duty matte textured face
  The reading tape is easy on the eyes in bright sunlight. Protects the tape numbers on the reading rod from wear and fading.
• Tape lock grommets are oversized, heavy duty brass
  Greatly minimizes the problem of tape tearing.
• Detector rail is black, high density, U.V. stabilized for long life
  Specifically designed to not become brittle when exposed to ultraviolet rays or direct sunlight, this reading rod detector rail is tough and durable.
• Solid tape lock with internal brake slide
  Provides for stronger, trouble-free, longer life reading rod operation.
• Tape lock pin cannot puncture tape
  Designed not to tear, puncture or rip the tape when pushed against the tape face instead of the grommet hole.
• DuPont nylon parts
  Tough and rugged for long-lasting life. The materials used in this reading rod are the same used for ski bindings and motorcycle parts.

10 Foot Aluminum Grade Rod (9.8’)

16 Foot Aluminum Grade Rod with three pull-out sections. Lower rod face width is 1-15/16” wide tapering to 1-1/2” at top section. Scale is silk screened onto a recessed face to better protect the numbers Locking pins are aluminum for long life. A carrying bag is included; heavy duty cordura with Velcro flap fastener and a carrying strap.

LaserLine Heavy Duty Aluminum AT 65-F Flat Head Tripod and AT65-D Dome Head Tripod

Download Brochure (PDF*)

Features of the LaserLine AT 65-F Flat Head Tripod and AT65-D Dome Head Tripod

• 5.5 inch head
• 10.5 lbs (14 lb shipping weight)
• Durable cam lock leg clamps
• Replaceable tripod feet and foot-tips
• Tripod extends from 40.5″ to 65”

Download Brochure (PDF*)

Frequent Applications:

• Tunneling
• Mining
• Offshore dredging
• Conveyor alignment
• Centerline control

Tunneling

LaserLine offers the most complete, well thought-out tunneling packages available. The LaserLine alignment laser offers ease of setup, stability, versatility, AND tremendous range!

Offshore

The LaserLine LR Series and T–2000 alignment laser will save you money by allowing accurate control of centerline to within four (4) inches per mile! This greatly reduces over excavation and the high cost of moving more material than bid for.

Lasers

T-2000

The LaserLine T-2000 alignment laser is a heavy-duty “building block” design, built for the rigors of the toughest construction environments. The T-2000 alignment laser may be added to from its basic configuration, depending upon the needs of your particular job or application.

The T-2000 alignment laser beam is fixed focused to infinity. This provides the smallest possible spot over the longest possible distance.

• High power: 5 Milliwatts of power provides more range to target area, even in adverse weather or when shooting through a series of forward targets.
• Ultra-fine horizontal and vertical fine adjust for fast and precise alignment on your set-ups.
• Very stable; once set in place, the T-2000 alignment laser stays on your forward target!
• The T-2000 is designed to accept a tribrach. This is especially beneficial when “leap frogging” to forward points in tunnel work.
• In tunnel work, the T-2000 alignment laser has three times the range (laser spot brilliance and quality), thus reducing the need to move the laser forward.
• In marine work, it translates to much greater visibility in adverse weather conditions.

T-2000-0

Designed for shorter range applications requiring the ability to pre-position the alignment laser to a forward point, then lock it in place for maximum holding stability. The T-2000-0 features the same laser power and spot brilliance as its bigger brother (the T-2000), but at a more affordable price. Once in place, it stays there!

LR-1050D/LR-2020D

The LaserLine LR-Series alignment laser was designed for long distance alignment applications where the ability to turn an angle is desired or required. The LR-Series features a large, easy to read LCD Direct Reading Digital Display for horizontal and vertical angles. This adds versatility in hard to set up locations, allowing the operator to turn angles from a known point. A foresight is not necessary. The laser beam is fixed to the vertical cross hair of the spotting scope, thus eliminating the need for a reflector or penta prism as a foresight.

The laser beam is fixed focused to infinity. This provides the smallest possible spot over the longest possible distance.

5 Milliwatts of power provides more range to target area, even in adverse weather or when shooting through a series of forward targets.

Some of the digital features include:

Digital Display of Angle for both vertical and horizontal angles are obtained and displayed in degrees or gons (internal switch). A large, alphanumeric dual-line LCD screen allows both vertical and horizontal angles to be displayed simultaneously. Symbols on the LCD are clear and easy to read for convenient operation even in dim light.

By simply pressing the “R/L” key, the LR-Series performs clockwise or counter clockwise horizontal angle measurement.

Accessories

Spotting Scope 6-24x 2000-0525

Variable power from 6-24x objective diameter is 40mm. Field of view varies at 100 yards from 17 feet to 4 feet depending on power setting. Ring mounts are satin chrome steel finish for rust free operation in wet conditions. Use with the LaserLine T-2000, or T-2000-0 alignment laser.

Fan Lens 2000-0035

Changes laser beam from a spot to a vertical place of laser light. The fan lens expands the laser beam in the vertical direction at 1320 feet per mile, while maintaining the horizontal width expansion at 4 inches per mile. Use with the LaserLine LR2020D, T-2000, or T-2000-0 alignment laser.

Universal Tunnel Mount 2000-10

An ultra solid, yet versatile multi-positioning platform for the LaserLine T-2000, T-2000-0, and LR-Series alignment laser. The mount gives you the ability to both horizontally and vertically position the laser to the pre-determined point that you require. In addition to offering tremendous versatility for your laser positioning, it is very rugged and stable.

Power Converter 1140

UL Listed, converts 110 or 220 VAC to 12 VDC. Internally protected from short circuits and overloads. Resets automatically – no fuses or circuit breakers. Use with the LaserLine LR-2020, T-2000, or T-2000-0 alignment laser.

Optical Plummet tribrach 2000-0630

Features universal 5/8 x 11 base plate thread. The range of the optical plummet is 1.5 feet to 50 feet. (0.5m to 15m). The circular level vial has a sensitivity of 10 minutes (2mm). Use with 2000-0620 adapter for the LaserLine T-2000, or T-2000-0 alignment laser.

Download Brochure (PDF*)

The System

The Laserline GL3000-series  laser striping system (GL3000PMC) uses an ultra-high visibility green laser to establish visual line control for your road paint striping truck or gun carriage package.

Depending upon the LaserLine model, the paint striping operator adjusts the guidance laser spot to the desired reference point on the road surface using a remote control panel located within the cab of the vehicle or manually at the laser. The guidance laser spot is impacted directly on the road surface and shows the operator exactly where the vehicle is, relative to “on line.” The guidance laser spot is on the road ahead of the paint striping operator so that the reference is in the driving field of view instead of a T.V. screen or boom pointer.

This LaserLine laser striping system is quick to set up and easy to use.

The Product

• Main Housing is weatherproof, containing an optic plate mounting platform, micro processor electronics, laser, laser mounting assembly, laser driver board, automatic cooling and heating system, and in the remote version, X-Y positioning control mechanism, drive motors, and optics. The entire unit is dry nitrogen purged to protect all components.
• 20 Feet of Interconnect Cable with a waterproof, mil spec, in-line connector mounted between the laser main housing and the control panel mounted in the cab.
• Control Panel allows the operator to turn the unit on and off on the manual version, as well as aim the laser spot toward or away from the vehicle, as well as left and right, on the remote control version.
• 5 Feet of 12 volt DC cable running from the control box for connection to vehicle’s 12 V power.

Specifications

• Laser: 532nM Class IIIA Green Laser
• Power: 11-15 Volt DC Positive or Negative Ground
• Power Draw: 4.00 Amps (Maximum Operating), 0.03 Amps (Sleep Mode)
• Laser Housing GL3000P (Remote):
  • Height: 6 1/8 Inches
  • Length: 12 Inches
  • Width-Housing: 6 1/2 Inches
  • Base: 9 1/2 Inches
• Laser Housing GL3000PM (Manual):
  • Height: 4 1/2 Inches
  • Length: 9 Inches
  • Width-Housing: 3 3/4 Inches
  • Base: 4 1/4 Inches
• Cable length from Laser Housing to Control Box: 20 Feet
• 12 Volt Power Cable Length from Control Box: 5 Feet
• Shipping Weight: 25 lbs.

Download Brochure (PDF*)

Features of the LaserLine automatic level:

• Ultra-bright clear optics
• Continuous tangent screw on both sides of the instrument
• Horizontal circle for turning angles
• Rugged metal housing surrounds the automatic level
• Wire hung air-dampened compensator
• Consistent stadia
• The automatic level mounts to flat-head or dome-head tripod

Rod Extension fully collapsed

Download Brochure (PDF*)

Features:

• Rod extension slides conveniently inside the rear rod when not in use.
• Allows you to extend the rod in one-foot increments, up to four additional feet!
• 10-foot rods become 14-feet, and 15-foot rods become 19-feet.

Click to Zoom