With different types of frame conditions such as sway, sag, twist and diamond this frame correction rack has the versatility that you need. The frame rack is available in three sizes (28′, 36′ and 40′) to accommodate any size vehicle that your shop might see. Bee Line also carries a number of different tooling groups so that you can start off with the tools that you need and grow your system as your needs change.

The post Bee Line Heavy Duty Frame Correction Systems appeared first on MS Foster.

The Space Saver ramp system is designed to take up less floor space than traditional ramp style alignment racks by reducing the number of flat runway sections needed. The Space Saver accomplishes this with a ramp section that can be raised and lowered extending the usable space of your alignment rack. The moveable section of the ramp is 16′ in length allowing for a shallow approach angle for trucks with low front bumpers and making it easier to clear garage door openings.

Bee Line’s Space Saver is a great way to get trucks off the ground so that the alignment techs have more room to work and can be more efficient. Raising a truck off the floor also opens up the opportunity for axle adjustment if necessary using Bee Line’s variety of axle correcting tools.

The post Bee Line Space Saver Ramp System appeared first on MS Foster.

the FPT9500 was designed to handle the abuse of having commercial trucks with a 16,000 lb. capacity per turning plate. The turn plates provide a natural unrestricted arc that is designed to follow the rotation of the kingpin motion to provide a smooth effortless rotation. Turning plates are essential to getting proper measurements, checking steering stops, setting toe and much more. With overall dimmensions of 24″ x 18″ x 2.15″ (L x W x H) these turn plates are a great option for use with an on the floor system or use on the complete alignment rack.

With over 100-years in the alignment space, Bee Line knows what it takes to align a commercial vehicle and provides products that are built to stand up to the test of time.

The post Bee Line Heavy Duty Turning Plates – FPT9500 appeared first on MS Foster.

This powerful mobile system includes everything that you need to get started doing front end alignments on your customer’s or fleet’s vehicles. Using a combination of laser and physical measurements the LC7550 is capable of reading all of your front end measurements including toe, camber, caster, KPI and steering stops. Bee Line’s uses tighter specs than the manufacturers to ensure that every truck that gets a Bee Line alignment goes down the road better than the day that it was new. Adding a tandem aligner (22000) gives your Beeline computer system the ability to preform a complete vehicle alignment.

As the service industry shifts to a more mobile format with mobile tire services being more common by the day and more fleets expecting maintenance to be performed on site, Beeline’s mobile alignment system is an easy to transport option for professional results in the field.

With over 100-years in the alignment space, Bee Line knows what it takes to align a commercial vehicle and provides products that are built to stand up to the test of time.

The post Bee Line Mobile Alignment System – LC7550 appeared first on MS Foster.

The OM8000 system uses a combination of targets mounted to the frame of the vehicle along with a single camera that references the targets on the frame to determine damaged areas. The OM8000 eliminates the need to set up strings, complicated gauges or risk making errors in calculation allowing for a more precise and calculated process. The system takes vehicle specific data to compare “before” images to factory specs and allows you to reference the specs after uploading the “before” images in a diagnosis software. Having accurate measurement during all steps of the frame correction from initial measurements, dynamic tracking of adjustments being made and final reporting allows for the technician to see changes they are making in real time to avoided unnecessary steps.

With different types of frame conditions such as sway, sag, twist and diamond this frame correction rack has the versatility that you need. The frame rack is available in three sizes (28′, 36′ and 40′) to accommodate any size vehicle that your shop might see. Bee Line also carries a number of different tooling groups so that you can start off with the tools that you need and grow your system as your needs change.

The post Bee Line Optical Frame Correction System – OM8000 appeared first on MS Foster.

The 22000 gives you the ability to do a total vehicle alignment building off of the front axle to make sure that any and all alignment issues on a vehicle can be taken care of. The tandem aligner uses laser accuracy to take measurements off of the centerline of the vehicle, the way it was designed by the manufacturer. Not all alignment issues are caused by the steer axles on commercial vehicles including tracking issues.

Bee Line’s 22000 Rear Tandem Aligner is not limited to the rear axles on your tractor or straight truck but can also be used on trailers as well. The Rear Aligner includes a kingpin gauge for trailers allowing you to align the most abused piece of equipment on the road.

With over 100-years in the alignment space, Bee Line knows what it takes to align a commercial vehicle and provides products that are built to stand up to the test of time.

The post Bee Line Rear Tandem Aligner – 22000 appeared first on MS Foster.

This handheld display allows the alignment technician complete control of the Bee Line alignment computer station from anywhere around the vehicle that they are working on. The EPM720 shows the same information displayed on the computer station in a portable manor. Get measurements, follow on-screen steps, move on to the next steps of the alignment and more from this compact remote display.  There is no more need to get in and out of the cab, walk back to the computer or waste any time during any alignment with the EPM720.

With over 100-years in the alignment space, Bee Line knows what it takes to align a commercial vehicle and provides products that are built to stand up to the test of time.

The post Bee Line Remote Display – EPM720 appeared first on MS Foster.

the FPT8500 was designed to handle the abuse of having commercial trucks with a 10,000 lb. capacity per turning plate. The turn plates provide a natural unrestricted arc that is designed to follow the rotation of the kingpin motion to provide a smooth effortless rotation. Turning plates are essential to getting proper measurements, checking steering stops, setting toe and much more.

With over 100-years in the alignment space, Bee Line knows what it takes to align a commercial vehicle and provides products that are built to stand up to the test of time.

The post Bee Line Steel Portable Turning Plates – FPT8500 appeared first on MS Foster.

The self-centering feature guarantees that your laser heads give you and accurate reading from the correct location. These mounts also allow for complete movement of the wheel and tire for checking runout, steering stops and more along with allowing free movement in the alignment heads. With quick and easy adjustment the LC4195B.1 is easy to take on and off any stud piloted or “Budd” wheel.

With over 100-years in the alignment space, Bee Line knows what it takes to align a commercial vehicle and provides products that are built to stand up to the test of time.

The post Bee Line Self-Centering Wheel Mounts – LC4195B.1 appeared first on MS Foster.

When compared to traditional floor jacks, the 7700 used two lifting points for a stable  and safe lift. The jack also includes a built-in safety lock so that the jack is mechanically locked and able to be used as a stand for the vehicle as well. Capable of lifting 24,000 lbs. you will have a hard time finding a vehicle that the 7700 can’t handle.

The 7700 has a minimum height of 8.5″ and can lift a vehicle over 20″. The handle is able to extend up to 9′ with easy to operate hand controls and a removable controller to make spotting a vehicle as you lift it safer and easier.

With over 100-years in the alignment space, Bee Line knows what it takes to align a commercial vehicle and provides products that are built to stand up to the test of time.

The post Bee Line Air/Hydraulic Floor Jack – 7700 appeared first on MS Foster.