Downloads
Features:
- Cleans using washer fluid and air pressure.
- Removes dirt, snow, road grime, and mist.
- Excellent for Cameras, mirrors, and collision avoidance sensors.
- Non-abrasive, non-contact cleaning action.
- Includes dash mounted rocker switch, fluid reservoir, pump, air solenoid, nozzle & bracket, wiring, tubing, and complete installation instructions.
- One-year warranty.
- Truck air pressure mixes with washer fluid for cleaning action.
TYPICAL APPLICATIONS:
Teaco CameraWash Timer (TOP-1115-3)
Designed to work with CameraWash for the TRUCK and RV industry.
The Teaco CameraWash Timer controls the washer pump and air solenoid in a multistage operation, enabling the operator to set the time for washer/air operation from 1 to 6 seconds.
The second timer can be adjusted to run air an additional 30 seconds after the washer/air operation to aid in removing the remaining washer fluid solution droplets from the lens of the camera or other surface being cleaned.
The third timer is adjustable from 1 to 30 minutes for delay between the wash/air operation.
SPECIFICATIONS:
- Mechanical: 5.25” W x 3.1” D x 1.5” H
- Temperature: 0 to 70 degrees C, 32 to 158 degrees F
- 2 position power rocker switch:
- 1 variable control: Adjustable from 1 to 6 seconds for (wash/air).
- 1 variable control: Adjustable from 1 to 30 seconds for (extra air).
- 1 variable control: Adjustable from 1 to 30 minutes (delay) between cycles.
- Input Power required: 12 Volts DC @ .25 Amps (for controller) plus current required for the solenoid and pump. This is normally 1.75 to 2 Amps. The control is protected from the12 Volt supply with an automatic resettable fuse inside the control box.
- Output: 12 volts supplied through relay contacts to the solenoid and pump.
