Download Brochure (PDF*)

The use of the LaserLine Wing Plow Guidance Laser helps to avoid costly property and plow damage which results in reduced downtime. It is clearly the safer way to plow.

The System

The LaserLine GL3000PMC wing plow guidance laser uses an “ultra-bright” green laser spot to establish the wing plow trailing edge location before you get there.

The laser spot impacts on the road/snow surface ahead of the truck, and shows the driver where the wing plow trailing edge will be. The laser reference spot is on the road and in the driver’s normal field of view.

GL3000PMC Guidance Laser mounted under headache rack

The LaserLine wing plow guidance laser (GL3000PMC) is electronically designed for cold weather operation. This laser is coupled to a special heat source for the exit window, to reduce or eliminate ice build-up on the front of the laser output lens.

The LaserLine wing plow guidance laser (GL3000PMC) also has a unique pneumatic snow removal system incorporated within the laser housing that automatically fires a blast of air at the front of the laser lens every five seconds. This removes snow build-up from the laser output lens.

The LaserLine wing plow guidance laser (GL3000PMC) leverages a class IIIA ultra bright green laser with 5mW of power. Green is most visible to the eye in all working conditions. The GL3000PMC laser is CFR21-1040 compliant and meets all federal and OSHA standards for operation.

GL3000PMC "ultra bright" green laser

The laser housing is weatherproof, hermetically sealed, and dry nitrogen charged for operation in virtually any weather condition.

The LaserLine wing plow guidance laser system works directly off the 12-volt side of truck, and will operate from 11 to 15 volts DC with positive or negative ground.

• Reduces plow and property damage
• Reduces downtime for plow repair
• Less strain on the operator *
• Safer

The Product

• Main Housing
  Weatherproof, containing optic plate mounting platform, micro processor electronics, laser, laser mounting assembly, laser driver board, automatic cooling and heating system; front window is automatically heated to reduce or eliminate icing.
• Pneumatic Air Blast Module
  Removes snow build up from laser exit window with automatic air blast every five seconds.
• Control Panel In Cab
  Allows the operator to turn the laser on and off as well as override the automatic air blast if more air is desired for snow removal.
• 20 Feet of Interconnect Cable
  With waterproof mil spec-line connector mounted between the laser main housing and the control panel mounted in the cab.
• 5 Feet of 12V DC Cable
  Running from control box for connection to vehicle’s 12V DC power.
• 20 Feet of ¼-Inch Pneumatic Hose Line
  Complete with connectors for tying into vehicle’s secondary air source.

Specifications:

• Laser: 532 NM Class IIIA Green Laser
• Power: 11-15V DC Positive or Negative Ground
• Power Draw: 4.0 Amps (Maximum Operating), 0.03 Amps (sleep Mode)
• Operating Temperature: -40° F to +50° F (-40° C to +10° C)
• Pneumatic: 120 PSI / 12V DC Operation
• Laser Dimensions:
  • Height:  4½ Inches
  • Length: 9 Inches
  • Width (At Widest Point): 6 Inches
• Cable Length from Laser to Control Box: 20 Feet
• 12V Power Cable Length from Control Box: 5 Feet
• Pneumatic Hose Length (Laser to Air Source): 20 feet
• Shipping Weight: 25 lbs