CameraWash | M.S. Foster & Associates, Inc. ​ ​ ​ ​ ​ ​ ​

CameraWash Vehicle Camera Washing System

Comments Off on CameraWash Vehicle Camera Washing System

CameraWash Vehicle Camera Washing System

The vehicle camera cleaner, CameraWash, cleans effectively using washer fluid and air pressure to remove dirt, snow, road grime, and mist from obstructing your camera view for vehicles in the truck and RV industry. The vehicle camera washing system is ideal for vehicle camera washing, mirror cleaning, and collision avoidance sensor washing.

The non-abrasive, non-contact vehicle camera washing system cleans the camera with the push of a button, providing you with year-round operation.


The vehicle camera cleaner includes a dash-mounted rocker switch, a fluid reservoir, pump, air solenoid, tubing and complete installation instructions to assist you with the process.

The truck air pressure mixes with the washer fluid for optimal vehicle camera cleaning action, allowing you to enjoy easy, carefree camera cleaning with the push of a button.

The CameraWash vehicle camera cleaning system also includes the optional timer for automatic cleaning, which can be configured to operate for one to six seconds with an additional 30 seconds of air pressure to follow to remove washer fluid from the camera lens. The third timer on the vehicle camera cleaning system can be delayed between one and thirty minutes for added convenience and ease of operation. Custom vehicle camera washer system kits are available to fit all of your needs.

The CameraWash vehicle camera washing system can be equipped with a optional stainless steel box for mounting on the side or underside with an optional nema box for simplified mounting. You can also add up to four nozzles per kit for enhanced vehicle camera cleaning.

The universal nozzle block design fits most camera mounting hole spacing, while the spray nozzle has 120 degrees adjustability to provide the optimal spray pattern for your vehicle’s camera. The universal nozzle block can be mounted to either side of the camera. The windshield washer reservoir with the fluid pump and the momentary rocker switch provide the ideal vehicle camera cleaning conditions for your vehicle mounted camera to keep the camera clear of debris and scratches to help your system last longer.

vehicle camera washing system

CameraWash Timer (TOP-1115-3)

Designed to work with CameraWash for the TRUCK and RV industry.

The CameraWash Timer controls the washer pump and air solenoid in a multistage operation, enabling the operator to set the time for washer/air operation from 1 to 6 seconds.

The second timer can be adjusted to run air an additional 30 seconds after the washer/air operation to aid in removing the remaining washer fluid solution droplets from the lens of the camera or other surface being cleaned – making for the optimum camera cleaning solution.

The third timer is adjustable from 1 to 30 minutes for delay between the wash/air operation. Enjoy the added ease and convenience of vehicle camera washing.


  • Mechanical: 5.25” W x 3.1” D x 1.5” H
  • Temperature: 0 to 70 degrees C, 32 to 158 degrees F
  • 2 position power rocker switch:
    • 1 variable control: Adjustable from 1 to 6 seconds for (wash/air).
    • 1 variable control: Adjustable from 1 to 30 seconds for (extra air).
    • 1 variable control: Adjustable from 1 to 30 minutes (delay) between cycles.
  • Input Power required: 12 Volts DC @ .25 Amps (for controller) plus current required for the solenoid and pump. This is normally 1.75 to 2 Amps. The control is protected from the 12 Volt supply with an automatic resettable fuse inside the control box.
  • Output: 12 volts supplied through relay contacts to the solenoid and pump.
Share Button

Comments are closed.